The durability of UK highway surfaces could be radically improved by adding hydrated lime to asphalt mixes according to European research.

And now a panel of experts is being brought together for a special webinar to explain the benefits of hydrated lime in asphalt and encourage its specification on the UK’s road network.

MPA Lime, which represents UK lime producers, says that when the recent National Audit Office report and Annual Local Authority Road Maintenance (ALARM) survey are both identifying the poor state of local roads, the time is right to raise awareness of a widely available product that’s known to improve the durability, longevity and sustainability of road surfaces.

Established evidence from highway authorities and researchers in the EU and USA – as well as research studies in the UK – shows how adding hydrated lime can benefit the asphalt in numerous ways, helping to improve the climate resilience of asphalt infrastructure.

Hydrated lime acts as an ‘anti-stripping’ additive, helping the bitumen binder to adhere to the aggregate; it also acts in a multi-functional way, reducing bitumen hardening with age and increasing moisture resistance, at the same time stiffening the bitumen to reduce rutting, and improving resistance to fracture growth at low temperatures.

Research suggests that typically with the addition of less than 2% of hydrated lime in the mix, the asphalt could last up to 25% longer which means slower road deterioration and extended maintenance intervals, leading to fewer potholes and less roadworks, as well as smoother road surfaces and better journeys for road users.

Hosted by MPA Lime, which represents UK lime producers, the webinar on Tuesday 15^th October 2024 from 1-2pm brings together more than 150 years of combined technical and practical career experience in asphalt materials. The panel members are:

Prof Gordon Airey, Professor of Pavement Engineering Materials and Director of Nottingham Transportation Engineering Centre (NTEC), University of Nottingham

Lyle Andrew, Executive Director, Institute of Asphalt Technology, UK

Dr Helen Bailey, Programme Lead: Asphalt & Pavements, Centre for Mineral Products, University of Derby and Director, The Driven Consultancy

Dr Didier Lesueur, CEO, Western Research Institute, Wyoming, USA

Andy Stevenson, Associate Director, Road Services, WDM Limited

Hydrated lime – also known as calcium hydroxide – has been specified widely particularly in the USA for many years as an anti-stripping additive and there, and elsewhere, to increase moisture resistance of asphalts. There’s also proven evidence that it can reduce asphalt ageing by lowering the oxidation of the bitumen binder. Hydrated lime has been used in the asphalts designed for UK and international airport runways for decades and it is already a permitted, multi-functional additive in the UK’s National Highways asphalt specifications and is in the register of durability improvement options towards achieving their zero carbon target. 

Across Europe and the USA hydrated lime is a regularly required component in asphalt and, in some locations, it is compulsory because of the clear evidence of durability and performance improvement leading to more resilient roads.

Research by the University of Nottingham shows how hydrated lime additions absorb unwanted ‘polar compounds’ (such as carbonyls and asphaltenes) within bitumen. Adding hydrated lime means that, with ageing, there are fewer oxidative reactions that cause bitumen to become stiffer, more brittle and lead to cracking and deterioration of roads, and development of potholes.

The study compared the performance of mastics containing hydrated lime to those made with granite or limestone fillers alone, and found that in all cases the hydrated lime made the asphalt softer after ageing – or less stiff – than its counterparts with standard filler alone. Other researchers are now observing a long-term case study on asphalt that was laid on a stretch of the A38 near Burlescombe in Devon in 2021.

Mike Haynes, director of MPA Lime says that the case for adding hydrated lime to asphalt is so compelling that highway authorities shouldn’t wait before specifying the mix.

“The condition of the UK's road network is rarely out of the headlines these days and so there’s never been a better opportunity for highway specifiers to learn or be reminded about the numerous advantages of hydrated lime as an approved and widely available asphalt additive with a proven track record in improving highway performance,” he said. “It just appears to have been forgotten about and is under used in the UK.”

“I am delighted that we will be joined by such an impressive line-up of speakers for our panel discussion that is looking to re-ignite interest in the long-proven benefits of adding hydrated lime to asphalt, improving durability, longevity and sustainability and climate resilience.”

“Longer lasting road surfacing materials means slower road deterioration and longer maintenance intervals, leading to fewer potholes, less roadworks and smoother road surfaces and journeys for road users.”

WEBINAR DETAILS
Title: Hydrated Lime in Asphalt
Date: 15th October 2024
Time: 1pm – 2pm
Register now

Ends.

About MPA Lime

MPA Lime is the trade association for the industrial mineral lime producers that represents the interests of the UK's lime industry at national, European, and international levels. Industrial mineral lime products are used in an astonishingly wide variety of applications across multiple industries including manufacturing, environment, food, water, construction, and civil engineering. MPA Lime represents the three major UK manufacturers of industrial mineral lime products; Lhoist UK, Singleton Birch Ltd and Buxton Lime Ltd as well as Associate Member integrated lime producers Tata Steel Europe; British Sugar and Specialty Minerals Ltd.

About the Mineral Products Association:

The Mineral Products Association (MPA) is the trade association for the aggregates, asphalt, cement, concrete, dimension stone, lime, mortar and industrial sand industries. With affiliation of the British Association of Reinforcement (BAR), the British Calcium Carbonate Federation, the Cement Admixtures Association (CAA), CONSTRUCT, Eurobitume, MPA Northern Ireland, MPA Scotland and the UK Quality Ash Association (UKQAA), it has a growing membership of 520 companies and is the sectoral voice for mineral products. MPA membership is made up of the vast majority of independent SME quarrying companies throughout the UK, as well as the 9 major international and global companies. It covers 100% of UK cement and lime production, 90% of GB aggregates production, 95% of asphalt and over 70% of ready-mixed concrete and precast concrete production. In 2021, the industry supplied £22 billion worth of materials and services to the Economy. It is also the largest supplier to the construction industry, which had annual output valued at £178 billion. Industry production represents the largest materials flow in the UK economy and is also one of the largest manufacturing sectors. 

For media enquiries, contact Robert McIlveen at: Robert.McIlveen@mineralproducts.org